If you did not saw a larger 3d printer, then TRONXY X5SA is the one to watch. The ergonomic design with transparent glass and whole touchscreen body made it the best of all 3d printers. Don’t forget to go through this TRONXY X5SA 3d printer review.
Professional designers around the world always need a DIY and durable 3d printer. It is the one they are always looking for. Printing large-scale sheets are their daily works. Besides, there is a balance of quality with the printing speed. Every inch for getting a quality design is required for them.
You won’t miss this model because it serves everything that a designer needed. The brand has given full support in its quality. The manufacturer had put enough function to make it perfect in all angles.
With the latest AI in its system, this printer is overall perfect for doing work. This article will tell you every detail about it. Read the overview section to take knowledge about its features. Moreover, make a clear understanding in choosing it by going through the Comparison section.
Overview of the Product
Before purchasing any product, you should keep a deep knowledge about it. You can get it from this section. This will tell you how perfect and suitable it will be for your work.
Dimension, Weight, And Adjustment
This model is more prominent. Its overall dimension is 25.6×21.5×25.8 inches. As it is vast so without a doubt, it will be a heavy printer. The weight of this product is 13 kg. If you have a separate working room, then this printer will fit. Otherwise, it would be best if you made your arrangement for adjusting it in your study or bedroom.
Inner Design And Printing Accuracy
The Tronxy x5sa 3d printer is structured with the moving motors on the X and Y-axis. With this XY core system, it prints out the documents and designs accurately. There is also a presence of a dual-z-axis motor that makes increment in the bearings of the hotbed. No other printer can print precisely, and error-free compare to this printer. The position accuracy for X/Y and Z-axis is 0.00625 mm and 0.00125mm.
Silent Motherboard
You will observe a low printing background noise from this printer. Despite having a sturdy power supply, this 3d printer gives you a silent print. The TMC ultra-quiet motor driver chip makes the motherboard silent while printing. It keeps the system free from danger and provides high-quality print.
Not a tough Assembler
It is not that tough to assemble a 3d printer, but you don’t need to worry about it. You will get a manual that tells every detail in building this product along with the product parts. You will also find a video file in assembling the DIY ink of the printer.
Power Supply And Temperature Adaptation
This printer runs by 110 volts voltage supply with a frequency of 50/60 Hz. The output power it emits is 24 volts and 360 watts. With this power, the hotbed temperature can adjust up to a maximum of 100 degrees Celsius. Moreover, you will also find the nozzle temperature can adapt to a maximum of 275 degrees Celsius.
Operating System And Software
The operating system that supports this printer is Windows. Through that system, you will get two software named Slicing and Tronxy to support this printer. The system software within which you are going to operate it is Repetier-Host, and Cura. It supports the G-code file format for final observation.
Printing Speed, Size, And Supporting Materials
You will find this product prints at 60 mm per second speed. So, no doubt this printer will save your whole day in printing heavy documents. The size of the paper it publishes is enormous in dimension. It prints paper of 13x13x15.7 inches. Moreover, it supports maximum materials like PLA, ABS, HIPS, PETG, WOOD, PC, and PVC.
Product Specification
- It is a DIY printing machine that prints anything with perfect molding precision, keeps everything stable under fast operation, and has vast space for hiding the motherboard and power supply.
- The TMC-Ultra motor driver chip in the motherboard keeps the printer silent even under high pressure.
- This product can continue the printing process even after the power goes off.
- It has a built-in sensor that controls the hotbed run auto-leveling and a detector for the filament.
Comparison between TRONXY X5SA 3d printer and Anet ET5X DIY 3d printer
| Topic | TRONXY X5SA Printer | Anet ET5X DIY Printer |
| Dimension | 25.6×21.5×25.8 inches. | 25x 23.5x 8 inches. |
| Weight | 13 kg. | 33.1 pounds. |
| Printing Speed | 60 mm per second. | 20- 120 mm/s. |
| Supporting materials | PLA, ABS, HIPS, PETG, WOOD, PC, and PVC. | STL, OBJ. |
| Built-in hardware | TMC ultra-quite motor driver chip, filament detector. | 32-bit control board with MCU STMF407, dual Z-axis rods and motors, thermal Runway protection. |
| AI | Touchscreen, Auto-leveling. | Matrix Auto-levelling, Full color touch screen, Auto-filament loader. |
| Operating Software | Repetier-Host, and Cura. | Cura, Repetier and Slimplify3D. |
| Operating System | Windows. | Windows and Macs. |
| Temperature | Nozzle less than or equals 275 degrees, Hotbed supports less than or equals 100 degrees. | Extruder can work at max of 250 degrees, Hotbed supports less than or equals 100 degrees. |
Why Should You Buy Tronxy X5sa 3d Printer?
There is no such reason for rejecting a DIY printer, but if you think about space, then there needs to be some compromise. One of the best 3d printers you will ever get within a cheap budget. You all know that a DIY ink can make your print documents bright in the light.
Technically, within this model, there is another printer that matches the Tronxy x5sa 2e review article. Almost all the features are close to each other. All of them are structured with an AI facility. This printer has an ergonomic outer look.
It comes with an entire touchscreen LCD body. Besides, it has an auto-leveling facility for the hotbed. Most of the time, users can’t keep track of the remaining ink in the filament. But this product has an AI technology of detecting the ink in the filament. It gives you a warning before the closer end of the ink.
You won’t feel disturbance or irritate others by the noise of printing pages. This product has a unique built-in chip in the motherboard that keeps the whole system silent. Even you will find this hardware setup in another model of this brand named Tronxy x5sa pro-400.
The most fantastic thing about it is that your printing won’t stop while the power suddenly goes off. You will find this benefit in the Tronxy x5sa pro printer also. Moreover, its nozzle can adjust temperature up to 270 degrees Celsius. The hotbed can adjust up to 100 degrees Celsius, which is good enough for a user.
So Overall, when it comes to quality, you will find enough features in it. Those who work as a designer or running a design company can easily fit this printer in a room. If you are thinking of home using for remote jobs, then better manage space for it. Otherwise, in the end, you will regret not having it.
FAQ
Below you will get some common thoughts people use to ask before purchasing a 3d printer. We hope it will clear out your mind to buy Tronxy X5sa 3d printer.
Is It Cheaper To Build Your 3d Printer?
If you think about the price’s cost, then it is not cheaper to build a quality 3d printer. Because you will get a fully assembled 3d printer in the market with all reliable parts that will last for years. But most of the time, people think about building their 3d printers before going out for a purchase.
After knowing the materials cost, they neglect to build their 3d printer. Besides, you don’t know whether it will give you a quality output or not.
What Is The Most Reliable 3d Printer?
Well, at present Monoprice brand is the most reliable in giving a quality 3d printer. But after them, the XY axis printer, i.e., talking about the Tronxy printer, is the most reliable one to use. They are budget-friendly and easy to assemble than other printers. Moreover, their features are incredible compare to the other 3d printers.
How Much Does It Cost To Get Something 3d Printed?
The minimum cost of printing a 3d printer starts with 3$ and goes maximum to 1000$. So Yes, 3D prints cost too much. If you are a regular printing user, then doing 3d images can low down your savings. It is better to purchase one of you who is regularly working.
Is 3d Printing Filament Expensive?
As compared to the regular two-dimensional printers, the cost of 3d printer is a little expensive. They are vast and structured ergonomically. In that sense, the cost of a 3d printing filament is costly. As this type of filament requires a great system to control, this material’s price is high. But don’t worry, the filament of a 3d printer lasts for long.
Conclusion
We hope from this TRONXY X5SA 3d printer review that you got an idea about it and learned it deeply. You also got some related product names that might help you select a good and affordable 3d printer.
This model is similar to this model if you find another printer named Tronxy 3d printer XY-2 pro, which is also better in performance. Those who have seen the Tronxy x5sa-500 pro review will understand how best is this Tronxy XS5A 3d printer.
So, you should get this model as soon as possible because you will get it at a cheaper price rate.
