Best 3d Printer Under 300 – Top Reviews and Budget Friendly Printer

The 3D Printing industry has seen explosive growth in the last decade, while it used to cost an arm and a leg to purchase anything that would print products you could sell or even want to use yourself the advances in technology have brought down the costs of these devices to consumer friendly levels.

Gone are the days in which 3D printing was only for the elite, now the everyday man can easily afford a 3D printing setup! We’ve taken the time to comb through hundreds of low-cost models and have cut it down to 10 models which we believe are the absolute best bang for your buck so you can get the best budget 3D printer without sacrificing on the quality of your prints in the process!

Comparison of 9 Best 3D Printers for Under $300 in 2020

Top 9 Best 3D Printer for Under 300$ Reviews in 2020

1. Comgrow Creality Ender 3 3D Printer

First up on our list is the Comgrow Creality Ender 3, built with the consumer in mind she comes jam packed with a die cut aluminum frame and weighing less than a 25 lb dumbbell it’s easily maneuverable while still remaining sturdy.

Measuring no larger than a 30 cm ruler all around it is the perfect model to be placed on a workshop desk without having to worry about it’s presence taking over the room. As this is a budget model it of course is missing features of the more expensive printers, but produces a great print nonetheless and is definitely an efficient buy.

Setup is easy, out of the box it comes with most of the pieces already assembled where as the only necessary construction is 20 nuts that need to be anchored in, but with a detailed instruction manual that’s an easy task. Performance wise the Comgrow more than earns its keep and it’s place on this list and as the source code is fully open to the public there is a large user base working to further improve and tweak the machine as time goes.

Functionally this printer reaches 110*C in just 5 minutes ensuring the hotbed is ready to go within just a short time from turning the device on, and any other sort of interruptions occur during the print process the built in resume function allows for the printer to pick right back up printing flawlessly where it left off before stopping. With so many great features I believe this is definitely one of the best affordable 3D printers on the market.

2. Monoprice Maker Select 3D Printer v2

Next up on our list is the Monoprice Maker Select 3D Printer, it’s heavier than the previous model however comes with a few extra features to make up for it.

As it commands more of a presence on your desk that is definitely a factor that needs to be taken into account when choosing a quality inexpensive 3D printer under 300 $, with a robust software suite and Manual leveling it provides for a supreme print experience when compared to the cheaper models Monoprice sells.

Putting it together is an absolute breeze coming with only 6 screws total it can be assembled in a matter of minutes and actually comes ready to start printing out of the box as it includes some preloaded 3D printable models. This ensures you’ll have an easy time with the setup and can of course get right to producing models.

It features a printing speed of up to 70 mm/s allowing for speedy printing jobs and a beautiful 100-400 micron resolution meaning you can actually put some great detail into your prints too! As for it’s base functionality it is capable of taking all types of 3D filaments meaning you don’t have to be picky with your material types, and even has its own MicroSD slot.

The slick display panel is actually somewhat external as it’s connected to the machine by wire only meaning you can set up your display on a different shelf if needed. Working with most common software such as Cura, Repetier and Simplify 3D. I feel this is a great model for anyone looking to get into 3D printing for the first time.

3. QIDI TECHNOLOGY X-one2 3D Printer

For those that want to get a great printer without having a congealed mess of a structure on their desk the X-one2 solves just that issue. Designed with looks in mind as well as it’s form functionality this 3D printer is well equipped to both handle the tasks you throw at it with ease and look great on any shelf.

The design in my humble opinion definitely makes it more suited to youth as I know if I was 10 I’d want one! That’s why I’ve added it to the list as a great recommendation for someone looking for a cute affordable printer. Because of its size and enclosed space it sports a max print size of 5.5 x 5.5 x 5.5 Inches meaning it’s better suited for smaller tools and models.

Encompassing a 3.5 Inch touch screen it’s designed to be very user friendly with it’s UI allowing even the biggest beginner to have a great time with the printer. Compatible with a wide variety of filament types and sporting a single Extruder it’s definitely designed to print small designs very efficiently for it’s cost basis as a 3D printer under 300 $.

Overall, I highly recommend this printer if you have a child in mind as the recipient, as it’s not designed to tackle large designs. However if you are in the market for an adorable 3D printer you can feel happy looking at on your shelf look no further then the X-one2.

4. Flashforge Finder Lite 3D Printer

If you’re in the market for one of the most beautiful printers I’ve ever seen look no further, straight out of the transformers movie this epic Flashforge printer is a high quality enclosed space 3D printing beast!

One of the best 3D printer under 300 dollars this adorable little machine is designed with smaller jobs in mind as it’s got a print size limit of approximately 14 centimeters all around, but what it lacks in print size it makes up in looks and user friendly features as it is extremely simple and looks incredible on a shelf!

Sporting a beautiful touch LCD screen, it’s designed to be as simple to use as possible and of course requires almost no assembly as it’s an enclosed design. The software is regularly updated by the makers and it comes with a bag of goodies for maintenance which not every printer includes!

On top of the maintenance goodies it sports an SD card out of the box so you can load it up right away. The sound levels on this puppy are quiet as can be coming it at only 50 decibels it’s the perfect machine for those with people around them that would rather not hear the loud printing noises from non-enclosed designs.

This is an absolute no-brainer for those who are new to 3D printing as it’s simplistic. It comes ready to print with minimal setup compared to some of the printers on this list that require hours of construction to be print ready.

5. JGMAKER Magic 3D Printer DIY Kit

Number 5 on our list comes from JGMAKER, it’s one of the more sleek designed printers available on the market sporting a beautiful display panel and it’s one of the best quality 3D printer under 300 $ available on the market.

Sporting industrial grade Silicone wire, and made from the same aluminum used in airplanes it has a solid metallic structure to it and best of all it actually features a built in power supply offering increased safety in the design.

It’s got quite the list of features compared to the sub 200$ models that float around the web, built with sturdy components that quickly warm up to the required printing temperature and a removable filament holder allowing for easy storage of the device without sacrificing function. Extremely light weighing just about 20 lbs it makes a great addition to any budding 3D printers workshop.

Setup time is a bit more then the models previously mentioned so if you aren’t feeling confident in your construction abilities stay away! However if you can brave the challenge of the build in return, you’ll receive an extremely efficient machine that comes with both print failure detection and resume capabilities meaning when things go bad you’ll still be in business to print.

The removable build platform is a handy feature, a lot of machines don’t have that capacity and as a result sometimes it’s tough to remove prints from the platform itself without the use of some form of tool which often results in damage to the very creation you just printed overall this machine is definitely great for new users and will provide a strong introduction into 3D printing!

6. GEEETECH A10 3D Printer Best for Kids

What GEEETECH’s A10 3D printer lacks in looks it surely makes up for in performance, providing a beautiful open source firmware ensuring that both the developers of the software and the community can work in unison to improve the printer for the good of all means you’ll never be without updates to the internal software.

It’s printing surface is actually one of the largest on this list coming in at 22 cm all around with the height almost that of a ruler. It’s an extremely versatile machine designed for printers of all different ages and experience levels, though I would stay away from an open designs for first timers.

Another unique feature is it’s adjustable extruder, many printers are fixed and making tweaks to the spring force is no simple task thus the machine was designed with the tinkerer in mind allowing for easy fixes! Probably one of the most interestingly unique features is actually the Reset Button, most printers have auto resume functions that sometimes fail leaving you with a half built design that can’t even be salvaged, not the A10, it’s just one button push to force the software to continue printing allowing for a less automated return to print feature.

As the rails on this printer are V-shaped they actually make way less noise than other designs which is why this is one of the best cheap 3D printer under 300 $ available on the market today. I highly recommend it for those looking for a functional not pretty machine!

7. ANYCUBIC Mega-S 3D Printer

ANYCUBIC has really outdone themselves in terms of design, for some reason, the label on the front and the military-esque name at the top makes this feel so futuristic. The best part is with only 8 screws it comes practically ready to go needing only minimal setup time. Which of course means it’s the perfect printer for anyone new to the world of 3D printing.

An additional surprise that makes this printer stand out versus its competitors is of course the added bonus accessories, it comes with it’s own SD card, and even the usb to plug it into a PC in case you didn’t own one already, additionally it even has a UK power adapter!

To top it all off it actually comes with a kilogram of filament meaning you can get right to printing without having to buy loads of extra filament that’s always a nice bonus as most printers even on this list don’t come with anywhere near as much as this one. The best part is the printer has a very active community on reddit & youtube.

There is a reason why we included this as one of the best 3D printer under 300 review the specs and you’ll be even more impressed, it features a large print area, a titan extruder and a glorious touch screen for simplified tweaks to the print process. Sporting a great print resume software loop that includes an alarm when you run out of filament in case you’re snoozing on the couch while she prints!

8. GIANTARM-GEETEECH A10M 3D Printer

The first Mix-Color printer on our list! Usually color mix printers are more expensive. That’s why this puppy is one of the top 3D printer under 300 $ available on the market.

While I definitely wouldn’t recommend this for a beginner as the second filament adds an extra layer of complications. That you just don’t need on your first rodeo. If you are someone in the market for a cost effective printer that can do more than one color look no further then the GIANTARM A10M you won’t find many high quality mix printers like it!

As it’s a dual filament you’d think the setup would be complicated. However due to it’s un-modular nature its actually a breeze to setup the company claims. It takes about 10 minutes, so it’s safe to say within a half hour you’ll have it up and running without issue.

With it’s hotend kit case you can rest assured that it will stay cool dissipating the heat produced by the second extruder with ease, thankfully too because clogging and leaking is what results from an improperly cooled 3D print extruder and you wouldn’t want your brand new machine to start failing for no fault of your own, that’s why it’s made our list!

As for it’s features it comes with a generous print size almost 30 cm all around. It can do larger pieces and with the added feature of a second color. It allows for a lot more customization than all of the previous mentioned models up above.

9. Creality Ender-3X 3D Printer

The Ender-3X, an extremely capable 3D printer ready to tackle a wide variety of jobs with ease featuring a beautifully tempered glass plate as the printing platform though not removable it’s always a great feature as it looks and feels much nicer than the metal plates and usually it’s easier to remove pieces from glass as opposed to metal which has a tendency to stick more! The Ender also sports MK.

8 extruders making for greatly reduced chance of plugging meaning printer is longer lasting than the lower cost models!. Assembly is extremely simple as it comes semi-knocked-down already allowing for an easy set-up. So, you can be printing as soon as possible. If an issue arises and with a great warranty from the manufacturer.You’ll be able to replace your parts with ease.

It comes with full power failure protection like most of the other printers on this list it’s capable of resuming a failed print job without error, and as it’s bed is made from glass it won’t warp like many of the metallic ones do over time ensuring all your prints are done on a proper flat surface ensuring quality.

For those looking into purchasing a printer for the first time I’d definitely recommend one of the above models. They are bit more user friendly, but if you are looking for simple printer to add to your workbench. And don’t want to spend an exorbitant amount of money nor do you want all the bells.

Conclusion

Well that’s it for our list of sub-300$ printers, there are plenty more options out there but these are our hand picked choice models which will serve the needs of everyone from a beginner to a pro. Embarking on a journey into the world of 3D printing is an adventure and for those who are new it quickly becomes an addiction, you’ll start with a 300$ machine and in a few years will be looking at your shelf full of printers wondering how in the heck you spent 10,000$ on all those printers without noticing it!

I hope you’ve enjoyed this hand picked list, did we miss your favorite model? Feel free to drop a comment with model suggestions we will definitely take a look at your suggestions. If we like them we’ll be sure to add them into future content lists! As always if you truly enjoyed the piece share it with a friend or two!